Why is my rain gauge not working?

If you believe your rain gauge is not working properly, there are two things you should check:

1. Is your debris filter clogged?
2. Is the rain gauge level?

​
1. Is your debris filter clogged?
See the picture of the rain gauge debris filter below. 

Image credit: Davis Instruments

The debris filter is located within the rain collector cone & is designed to filter out leaves, dirt, and other debris so that it doesn't hinder rain collection.

Please check the filter & clean out any debris that may be clogging it.

2. Is your rain gauge level?
Remove the rain collector cone from the base by twisting it counterclockwise. Once you remove the cone, you should see the tipping spoons & bubble level (level identified by red box below). 

Image credit: Davis Instruments

Verify the bubble is in the center of the level. Adjust the PVC "legs" of the rain gauge, as needed. Replace the rain collector cone by twisting it clockwise. 

• Related Articles

• How do I know if the base station is working?

  Step 1: Check the Status Light. Open the electronics box & check to see if the status light (outlined in red below) is flashing green. If it is flashing green, your base station is working. Step 2: Check your Cheat Sheet (if you have one). If you ...

• How do I change my software subscription?

  Keep reading to learn how to upgrade, downgrade, or cancel your software subscription. Sensor stations, sensor stations with an add-on rain gauge, and base stations with an add-on rain gauge each require a software subscription.  1. Click on your ...

• Trellis' Irrigation Recommendations

  What are irrigation recommendations, exactly? For users with Trellis' soil moisture sensors, Trellis’ irrigation recommendations provide suggestions for when to irrigate their field. Bottom line, we use current data from your sensors to predict when ...

• How do I archive my data from the season?

  When the season is complete, get the most from your data by archiving it and being able to analyze anytime! With the archive feature, you can now save either field or hardware specific data within your Trellis dashboard. If your hardware is in a ...

• What do the lights on the sensor station circuit board mean?

  The lights on the circuit board help you understand how the sensor station is working. Inside the top of your sensor station electronics box, you should see the following 'cheat sheet' Sensor Station Cheat Sheet 'Good' If the sensor station can ...